Four heads can be mounted as standard, and six heads can be mounted as an option.
One machine covers the work of three to six machining centers.
Equipment for workpieces with a large number of holes!
Ideal for transmission cases, cylinder heads, cylinder blocks, etc.
Four multi-heads can be mounted as standard, enabling 4-process multi-axis machining in a short time.
The head change time of 4.5 seconds is significantly shorter than that of conventional multi-head change M/C, dramatically increasing the amount of machining within a given cycle time.
Each multi-head can be set to any number of spindle speeds through the use of a gear train system, making it very effective for multi-process machining and model setup in a production line.
| Cubic 4&6 / Cubic Speed Magic Specifications | ||
|---|---|---|
| Model | Cubic 4&6 | Speed Magic |
| Control Method | FANUC 35i-MB | |
| Control axis | 1 axis | |
| Max. spindle travel | 500mm | |
| Target workpiece size | 500mm×450mm | |
| Spindle motor | Max. 15kw | Max. 37kw |
| Spindle Speed | Max. 3,500rpm | Max. 12,000rpm |
| Head to Head | 2.0sec | 1.0sec |
| Chip to Chip | 7.5sec | 4.4sec |
| Feed motor | AC4.0kw(Model22/3000i) | |
| Index drive system | FANUC35i-MB α12/3000i | |
| Multi-spindle head selection | 4sets / 6sets | |
| Multi-spindle head size | 500mm×600mm | 400mm×500mm |
| Hydraulic tank unit | 30L (with inverter) | 60L |
| Multi-spindle head clamping method | Mechanical | |
| Machine size [W x H x L] | 2,200mm×3,300mm×2,600mm | |
| Gross weight | 8,000kg | 11,000kg |
・Specifications are subject to change without notice.
・The maximum size of spindle, feed, and index motors are shown.
The size is subject to change depending on the specifications.
The product images shown are only examples. When considering upgrading existing equipment, there are no restrictions on the manufacturer or specifications of the robot used.
All of our products are proposed based on the customer’s requests after hearing the details of the customer’s production line layout, capacity, product outline, and personnel allocation.
